ARG/VRSG – SUBPLATE RELIEF VALVE

Description
General
| Tightening Torque | 60 Nm |
|---|---|
| Ambient Temp. | -20°C to +50°C |
| Cartridge Material | Working: Hardened, ground steel; External: Zinc plated |
| Manifold Material | SG Iron (up to 350 bar) |
Hydraulic
| Hydraulic Fluid | Mineral oils. Contact sales office for other fluids. |
|---|---|
| Max. Pressure | 350 bar |
| Rated Flow | 200 lpm |
| Leakage | Less than 35 ml/min |
| Max. Contamination Level | ISO 4406 18/16/13 (25 µm nominal) |
| Viscosity Range | 5 to 500 cSt |
| Hydraulic Fluid Temp. | -20°C to +90°C (Standard Seals) |
| Seal Kit Number | Contact sales office |
| Ordering example | VRSG03 P 20 2 N H 24 |
|---|---|
| Datasheet | 1-510 |
Application
Pressure Relief valves are used to limit the pressure in the system as set on the valve. Pilot Operated Relief Valves are applicable more in systems where pressure regulation is needed over pressure safety. The valve is ideal for continuous duty providing accurate pressure control with constant or varying flows.
Operation
When the inlet pressure at Port 1 (Pressure) exceeds the setting of the valve, the ball unseats causing the pilot section to open. This results in a small flow across the orifice in the main spool. The subsequent pressure drop moves the secondary spool against a light spring opening a ring of radial holes in the sleeve and allowing relief flow to Port 2 (Tank)
Features
Very low pressure rise for any increase in flow giving accurate pressure control. Smooth operation due to presence of a balanced piston. Hardened working parts ensure a long, reliable, trouble-free life. Cartridge construction gives maximum flexibility in mounting
Available on request. Ask an engineer →
Available on request. Ask an engineer →
Tucson Hydrocontrols designs and manufactures hydraulic cartridge valves in India, with technical support for component selection and OEM applications.
Manufacturing, quality & supply information Discuss this product with our engineers







Reviews
There are no reviews yet.